Electro-Permanent Lifting Magnet (Battery Type) EPLMB Series
Feature:
- Battery type Permanent magnet electronic control structure design, with Neodymium (NdFeB).
No electric power supply required to keep magnetic chuck ON and provides maximized safety in case of power failure. - Low-voltage safety warning system, can detect the lithium battery power through the screen at any time.
- With explosion proof Lithium battery, the charger can be setting 110V~220V.
EPLMB-3000B can be used for operating 160 cycles after the battery is fully charged.
EPLMB-4000D can be used for operating 100 cycles after the battery is fully charged. - The magnetism is divided into 5 levels, it can be adjusted the best magnetic force level for different workpieces.
- Modular design can be freely expanded the output port, and the number of EPLMB Lifters are according to the application.
- The numbers of EPLMB can be operated by wireless remote control the maximum can be 10 pcs EPLMB Lifter. Under unobstructed environment, the wireless remote control distance can be 20 meters.
- Customization：Replaceable induction block will be alternative option according to different workpiece sizes or shapes to meet the various applications requirements.
- Proximity sensor device: When the hoisting and lifting is started the wireless remote control device can't carry out any operation to prevent potential risk of workpiece dropping caused by mistouch the button.
Application:
Suitable for large iron and steel plate lifting and moving.
Warning!
Do not operate at temperatures above 80℃(176 F).
3 models are available:
1.EPLMB-3000B:
- Suitable for flat and thin workpieces above 10mm.
- EPLMB-3000B can be used for operating 160 cycles after the battery is fully charged.
Note:
Induction block EPLMB-IB Series can be replaced and used for various type of workpiece such as steel plates, iron blocks, molds, cylindrical iron or irregular castings etc. for more application efficiency.
| Lifting Capacity | Safety Factor | Dimension | Charging Voltage | Voltage | Current | Weight | No. of Pole |
|---|---|---|---|---|---|---|---|
| 3000 kgf | 3.3 times | L460 mm x W470 mm x H370 mm (18.1"x18.4"x23.5") | DC 54.6V | DC 48V | 60 A | 172 kg | 36 |
| Level Force 1 Lifting Capacity | Level Force 2 Lifting Capacity | Level Force 3 Lifting Capacity | Level Force 4 Lifting Capacity | Level Force 5 Lifting Capacity |
|---|---|---|---|---|
| 600 kgf (1320 lbf) |
1200 kgf (2640 lbf) |
1800 kgf (3960 lbf) |
2400 kgf (5280 lbf) |
3000 kgf (6600 lbf) |
2.EPLMB-4000D:
- Suitable for steel plates, molds, cylindrical iron or irregular castings workpiece.
(Special accessories are required-EPLM (D)-IB Series) - EPLM-D(B) can be used for operating 100 cycles after the battery is fully charged.
| Lifting Capacity | Safety Factor | Dimension | Charging Voltage | Voltage | Current | Weight | No. of Pole |
|---|---|---|---|---|---|---|---|
| 4000 kgf | 3.3 times | L530 mm x W500 mm x H647 mm (20.9"x19.7"x25.4") | DC 71V | DC 63V | 20 A | 270 kg | 10 |
| Level Force 1 Lifting Capacity | Level Force 2 Lifting Capacity | Level Force 3 Lifting Capacity | Level Force 4 Lifting Capacity | Level Force 5 Lifting Capacity |
|---|---|---|---|---|
| 800 kgf (1760 lbf) |
1600 kgf (3520 lbf) |
2400 kgf (5280 lbf) |
3200 kgf (7040 lbf) |
4000 kgf (8800 lbf) |
3.EPLMB-4000DS:
- Suitable for flat and thin workpieces above 20mm.
- EPLMB-4000DS can be used for operating 100 cycles after the battery is fully charged.
| Lifting Capacity | Safety Factor | Dimension | Charging Voltage | Voltage | Current | Weight | No. of Pole |
|---|---|---|---|---|---|---|---|
| 4500 kgf | 3.3 times | L660 mm x W480 mm x H684 mm (26.0"x18.9"x26.9") | DC 71V | DC 62V | 18 A | 350 kg | 24 |
| Level Force 1 Lifting Capacity | Level Force 2 Lifting Capacity | Level Force 3 Lifting Capacity | Level Force 4 Lifting Capacity | Level Force 5 Lifting Capacity |
|---|---|---|---|---|
| 900 kgf | 1800 kgf | 2700 kgf | 3600 kgf | 4500 kgf |
Induction Block: EPLMB-IB Series
- Induction Block EPLMB-IB series could be machining according to varies workpiece shapes to increase workpiece touch surface for improving lifting capacity.
- The EPLMB-4000D series can be used with different Induction blocks EPLMB-IB for the variety workpiece shapes required.
- Induction block EPLMB-IB Series can be replaced and used for various type of workpiece such as steel plates, iron blocks, molds, cylindrical iron or irregular castings etc. for more application efficiency.
When lifting round steel, the maximum lifting capacity is 2,000kgf due to installation of V-shaped EPLMB-IB.
-
- Spreader bars help keep large or irregular loads under control during transport.
- Can be free to set up position, numbers and distance of EPLMB according to the dimension of workpiece and application for lifting balance, safety and convenience.
- Operated by wireless remote control, a single operator can control multiple EPLMB Lifter simultaneously which can easily lift large workpieces and greatly reduce the time for personnel to operate the lifting workpiece.
Custom-made product, please specify the workpiece dimension and weight before place order.
-
- Electro-Permanent Lifting Magnet (battery type) EPLMBS series is Custom-Made professionally. It could be customized according to workpiece shape, size and weight, with Custom-Made structure design to meet the different application of customers' various industries.
Example
