Electro-Permanent Magnetic Chuck EEPM-CIT Serie
- Super power magnetic force 1250kgf/100cm²±5%.(4 Poles)
- Control each working face for ON and OFF, so it can be load and unload the workpiece on each working face. 3 seconds control for power ON and OFF.
- EEPM-CIT2F with 2 magnetic working face, can be clamp 2 workpiece for machining. Suitable for bigger workpiece machining.
- EEPM-CIT2F2T with 2 magnetic working face and 2 T-slot working face, can be clamp both of magnetic and non-magnetic material of workpiece machining. Suitable for smaller workpiece machining.
- EEPM-CIT4FT with 4 magnetic working face and T-slots available. Suitable for smaller workpiece machining.
- Without any obstructed movement of cutters during machining. Can be use all the functions of CNC 4 Axic Index Device completely.
- Suitable in use for combine with CNC 4 Axis Index Device.
- Minimum thickness of workpiece required : 10mm.
- Minimum size of workpiece required as 4 alternate magnetic square poles and above is necessary for optimum clamping.
Unit:mm
(Customization is available.)
| MODEL NO. | DIMENSION | PITCH | POLE | NO. OF POLE | TOTAL HOLDING POWER kgf ±5% | CHUCK N.W. | VOLTAGE (Single Phase) | CURRENT AMP | CONTROLLER (included) |
|---|---|---|---|---|---|---|---|---|---|
| EEPM-CIT2F | 300×570 | 10 | 50×50 | 32×2 | 10000 | 141 kg | CHUCK DC 220V CONTROLLER AC 220V / 480V |
30A | C2-2C1 |
| EEPM-CIT2F2T | 240×570 | 10 | 50×50 | 24×2 | 7500 | 228 kg | 23A | C2-2C1 | |
| EEPM-CIT4FT | 240×570 | 10 | 50×50 | 16×4 | 5000 | 219 kg | 20A | C4-4C1 |
